How To Build A DIY Cannabis Grow Tent In Just 3 Steps!
Want to grow your own weed? DIY grow tents are easy to build and give you complete control over your plants’ growing environment so you can produce top-tier bud!
Looking for a simple, cost-effective setup for growing your own weed? Below, we’ll walk you through the simple process of building your own grow tent for a fraction of the price of a store-bought tent/box.
WHY BUILD A DIY GROW TENT?
Growing your own weed is a great experience. Germinating your seeds and watching them grow into healthy plants with big, aromatic buds is a great way to develop a deeper connection with this ancient plant. Not to mention, you’ll likely end up with a far superior product than what you’re able to score elsewhere.
Unfortunately, not everyone has enough space to grow plants outdoors under the sun. That’s where a DIY grow tent comes in; for many people, a homemade grow tent proves to be the most cost-effective and efficient setup. While small grow tents are pretty cheap, you can build your own tent for next-to-nothing if you take the time to hunt around for supplies. Plus, they allow you complete control over your plants’ growing environment and produce a great harvest every time!
IMPORTANT CONSIDERATIONS FOR YOUR DIY GROW TENT
Before you start looking around for building materials, take a few minutes to reflect on these important considerations for your tent:
Cannabis plants need well-defined light and dark periods in order to flower properly. Light leaks during dark hours can stress photoperiod strains, stunting their growth, interrupting their flowering, or even triggering hermaphroditism. Even autoflowering strains are believed to rely on consistent dark hours for respiration, photosynthesis, and more. Hence, your DIY tent must be lightproof.
Cannabis needs regular watering and feeding. Make sure your tent is waterproof so runoff or spills don’t cause any damage to the area around your tent.
Cannabis plants need proper airflow to grow properly. Poor airflow, on the other hand, can create hot spots in your tent that trap heat and humidity, creating a breeding ground for bacteria and attracting pests. Your tent needs to be well-ventilated to prevent these problems.
The size of your grow tent will vary depending on the amount of space you have available, your budget, and how many plants you plan on growing. A 1 x 1m tent is arguably the most common size used by hobby growers, but you can go bigger or smaller than that based on your needs. Just know that if you want your plants to reach their full potential, your tent will need to be at least 1.5–2m tall to give them enough space to grow and prevent them from getting too close to your lights.
WHAT DO YOU NEED TO BUILD A DIY GROW TENT?
Building your own tent is surprisingly simple. Here’s a list of everything you’ll need:
19mm PVC pipes are sturdy, cheap, and ideal for creating the frame of your tent. You’ll need:
• 16x straight pipes for the verticals and horizontals (the length of pipe will vary depending on how large you want your tent to be)
• 8x 90-degree corner fittings
• 4x t-fittings
• 1x cross fittings
Panda Film works great as the walls of your tent. Remember to use the black side of the film on the outside to absorb light, and the white side on the inside to reflect it.
LED GROW LIGHT
There are many different grow lights on the market, but we recommend LEDs for their energy efficiency and durability. HID lights are cheaper than LEDs and can produce great results, but they’ll need replacing after two harvests and use a lot of energy.
There are plenty of fans on the market. If you’re building a large tent for big harvests, we recommend using a fan and carbon filter to eliminate the odour from your plants. If you’re building a tent to grow just a few plants, a regular wall fan will do fine.
Once you’ve got your materials, you’ll need the following tools for the assembly of your tent:
• Duct tape (to create the Panda Film covering for your tent)
• Hand saw (in case you need to cut any of your PVC pipes to size)
• Velcro (for the opening of your tent)
HOW TO SET UP YOUR DIY GROW TENT
Now that you’ve got your materials and tools, follow these steps to build your very own cannabis grow tent in less than a day:
STEP 1: ASSEMBLING THE FRAME
If you weren’t able to buy your PVC in the size you need, cut it to size using a hand saw. Whatever size tent you’re building, you’ll need 16 straight pieces of pipe; 4 for the verticals (which should be at least 1.5m long), 4 for the base, and 8 for the roof of your tent.
Once you’ve got your straight pieces of pipe cut to size, use the fittings to connect them and build the frame of your tent. Keep in mind that your roof should have a cross fitting in the middle for extra stability to hold your light, fan, etc.
STEP 2: COVERING YOUR TENT
You’ll need to cover your tent twice; once with the white panda film for the inside of the tent, and again with black film for the outside.
The easiest way to do this is to start with the walls; tightly wrap a single piece of film around 3 of the 4 walls (the 4th will be the opening of the tent). Secure the film to the PVC pipes where your opening will be.
Next, cover the roof of your tent with another piece of film. Make sure there’s at least 3–5cm of overlap on every wall, and stick the sides down with duct tape. Step inside your tent, look for light leaks, and cover them using duct tape from the outside.
Finally, for the opening of your tent, cut a piece of film long enough to run from the middle of the roof to the floor. Secure it to the roof of your tent using duct tape and to the PVC frame on the side and bottom using Velcro.
STEP 3: INSTALLING YOUR LIGHT AND FAN
Install your grow light to the top of your tent according to the instructions that came from the manufacturer. Remember to pull the power cord out through a small opening in the roof and seal the sides with duct tape to avoid light leakage.
Finally, sit your fan on the floor, and you’re done!
TIME TO START GROWING CANNABIS!
Now that you’ve got your DIY tent built, it’s time to get growing. Make sure to read our post on indoor cannabis growing equipment for a complete list of all the gadgets you’ll need to grow your plants, and don’t forget to order your seeds directly from our web store to ensure a great harvest. Happy growing!
Want to grow weed on a budget? Click here for simple instructions on how to build your own grow tent from scratch. It's easier than you might think!
How to Start Growing World-Class Weed for $135
You want to try growing weed but refuse to spend a fortune. You don’t need the biggest harvest ever, but your time or effort must be rewarded with a good amount of high-quality buds the very first time.
The method in this tutorial will give you…
- 1+ ounces per harvest (2-4 ounces is average)
- Potent high-grade buds of your chosen strain
- Seed to harvest in under 90 days
- As little as $135 to get started (supplies list with links below)
- Electricity: $10/month (for USA average electricity cost of $0.12/kWh)
Total Cost of 1st Grow: $135 plus $10/month electricity (as little as $20/grow for supplies after that)
This is the basic setup (total estimated cost includes seeds, grow light, grow medium, plant containers, and nutrients)
Example of buds produced (strain is Auto Amnesia by MSNL)
Here’s an overview of all the supplies you need to start growing cannabis via this method:
Grow light – Starting at $70
The average cost of electricity in the USA is $0.12/kWh. At 18 hours/day, that’s an electricity cost of about $10/month for the 150W HPS, and $7/month for the HLG 100.
- Cheapest: 150W HPS grow light ($10/month for electricity) – $70
- Premium Alternative: HLG 100 v2 3000k Quantum Board ($7/month for electricity, yields the same or more, less heat, no need to replace a bulb every 3-4 grows ) – $150
This $70 grow light can produce up to 5 oz (average of 2-4 oz)
Plant pots or containers – Starting at $4 for one
- 2-gallon pots with saucers
- Recommended 1-2 plants
- Usually $3-4 for a 2-gallon pot with a saucer at a garden store or plant nursery
- Buying pots online is cheaper if you get multiple pots at once
- Free alternative: you can use almost any container or bucket to hold your plants as long as you drill holes out the bottom to let extra water drain through. You also want some sort of tray to catch runoff water and make sure it doesn’t spill on your floor.
Plant pots are usually sold as a set online, but garden stores sell individual pots. Or DIY your own pot for free!
Grow medium (soil, coco, hydro, etc) – Starting at $18
Your plants need a place to put their roots. You have lots of different grow medium options for growing weed, and the most common is good old-fashioned soil.
- Just about any organic potting mix will work. Avoid any soil with “slow-release” nutrients unless they’re organic and have been composted into the soil.
- Example: Black Gold Organic Potting Mix (one bag will fill 4 gallons worth of pots, or two 2-gallon pots) – $18
- Premium Alternative: Coco Loco – This is my favorite soil potting mix. My cannabis plants absolutely love this stuff and it’s actually pretty economical. One bag fills 12 gallons, so even though it costs double the cheap option, each bag lasts 3 times as long – $35
- Often cheaper to buy soil in person than online (especially with shipping costs)
Learn more about growing in soil or coco. Adventurous alternative: Hydroponics
Nutrients – Starting at $10
If you’re starting with soil, you may be able to avoid using nutrients at all. Yet if plants use up the nutrients in the soil you’ll start seeing nutrient deficiencies and slow growth. To help ensure the best yields and bud quality, I recommend you get at least a Bloom nutrient (low in Nitrogen and high in Phosphorus/Potassium) for plants that are actively growing buds.
- Recommended: Dyna-Gro Grow & Bloom – $21 (great for cannabis in any setup, any grow style) – although originally developed for orchids, this simple nutrient duo excels at growing cannabis and is now marketed directly to pot growers.
- If you can’t afford both bottles, get just Bloom. The smallest bottle usually costs $10-12.
- If growing in coco or hydro, you need to use nutrients from beginning to end, and Dyna-Gro Grow + Bloom excels at that.
- Follow the included instructions at 1/2 strength (same with almost any nutrient system for cannabis plants). Only increase the amount if you notice the plant is getting lime green or pale all over, which is the main symptom when a plant needs overall higher levels of nutrients.
If you can’t get both bottles, at least get a bottle of Bloom so you don’t run into deficiencies during the crucial bud-building phase
In an absolute pinch, you can use cactus/succulent nutrients in the budding stage since they typically have similar nutrient ratios. However, they don’t usually contain many micronutrients, which means they may not perform as well as something more complete like Dyna-Gro.
A place to grow weed
You can put your plants almost anywhere as long as you have access to water, fresh air, and a way to hang the light. Some common examples:
- closet (common)
- spare bathroom (easy access to water and a drain)
- spare room
- garage, basement, or attic
- Read more about choosing the right spot
This is one of my first grows (circa 2008). I put the plants right on the floor in a walk-in closet and hung the light from the bar you hang clothes from. This setup produced great weed, though I highly recommend putting something down to protect your carpet!
I’ve seen some growers DIY some pretty amazing grow spaces
Possible upgrades for your grow environment (all are optional but nice)
- Grow tent – super convenient way to set up a “pop-up” grow area, costs $50-100 on average
- Clip-on fan(s) or small table fan – if you need extra air movement
- A carbon filter and exhaust fan for smell control (the more weed you grow, the bigger the smell)
- Reflective walls – use sheets of mylar, paint walls white, etc.
- Rope ratchets – helpful for raising/lowering your grow light, carbon filter, or anything else you’d like to hang in the grow area. Much more convenient than using rope.
- Thermometer/Hygrometer to measure the temperature and humidity. I like models that let you hang a probe in the grow area so you’re measuring the exact spot you want.
It’s hard to beat the convenience of a grow tent. While not necessary to success, grow tents can be put anywhere for an instant “pop-up” waterproof grow space that helps contain heat, light, and smells. Also great for keeping multiple grow spaces at the same time.
Seeds or clones – Starting at $30 for 3 seeds
My recommended strains start at
$30 for 3 seeds. There are cheaper strains, but these are ones I know and recommend.
3 Main Ways to Get Plants
- Buy seeds online
- Get seeds or clones in person
- Use seeds you find in buds (bagseed)
Did you know you can buy cannabis seeds online and get them shipped to you?
For the best results with this tutorial…
- Order from a reputable breeder to ensure you get the results you expect.
- Choose auto-flowering seeds to harvest in under 90 days. I like auto-flowering strains for first-time growers because plants are ready to harvest quickly, tend to stay on the smaller side, and automatically make buds without you doing anything special. They are simple: give water, nutrients, and light, then wait for harvest. However, you probably won’t run into any auto-flowering seeds unless you get them from a breeder.
- Choose feminized seeds to ensure all plants are female and grow buds. Save yourself the trouble of dealing with male plants or the possibility of seedy buds. Learn more about feminized seeds. Just about all auto-flowering seeds are feminized unless they specifically are listed as “regular”.
Choose autoflowering feminized seeds from a trustworthy breeder to ensure every plant grows buds and is ready to harvest in under 90 days. This Cinderella Jack Auto by Dutch Passion produced many dense potent buds and was harvested 79 days from germination
Looking for auto-flowering seed recommendations?
- Zkittlez Auto by Seedsman – Seedsman is both a breeder and a seed bank. They carry pricey high-end strains from many breeders but also use their connections to offer new and celebrated genetics at reasonable prices. A few years ago, Seedsman started focusing on their in-house auto-flowering breeding program, and have built an impressive autoflowering strain library. Their easy-to-grow Zkittlez autoflowering strain is popular because buds are potent, smell surprisingly sweet, and taste fruity. Great for someone who wants high potency combined with the taste and smell of new genetics – $30 for 3 seeds
- Gelat.OG Auto by Seedsman – This may be the best autoflowering version of the trendy and euphoric Gelato strain. Plants tend to stay on the shorter side and buds occasionally turn purple. For someone who wants STRONG mental and physical effects above all else – $30 for 3 seeds
- Auto Amnesia by MSNL – Forgiving and easy to grow, buds always come out glittery and potent. I’ve grown this strain multiple times and it responds remarkably well to every light I’ve tried including cheap “blurple” LEDs that stressed out many of the other plants. In fact, Auto Amnesia almost seems to perform best in extreme conditions as some of the best buds came from a plant that grew too close to the light. The one downside is that plants tend to grow a bit stretchy/tall compared to the others on this list (though they respond well to bending/LST to keep them short and are resistant to light stress) – $40 for 5 seeds
- Auto Grand Daddy Purple by MSNL – I’ve had really good experiences with all of the MSNL autoflowering strains. This particular strain often turns purple and buds come out dense with stellar effects and a spicy-sweet smell. You can help promote purple coloring by giving plants warm days and cool nights in the last 2-3 weeks before harvest – $52 for 5 seeds
- THC Bomb Auto by Bomb Seeds – I’m super impressed by this strain every time I grow it. It thrives under many different types of lights and plants grow fast and bushy. Good-to-great yields and the buds get encrusted in trichomes/glitter. I actually got two of these plants lab-tested (as part of a different project) and buds measured between 18-20% THC, exactly as advertised – $50 for 5 seeds
- Cinderella Jack Auto by Dutch Passion – I first grew this strain after a representative from the company told me it was Dutch Passion’s most potent autoflowering strain. I was beyond pleased with the results I got every time I grew it. Dense and glittery buds, high-yielding, ultra-high potency (couchlock) and plants are overall forgiving to growing mistakes – $42 for 3 seeds
- Ultimate Auto by Dutch Passion – easy to grow, very high yielding (usually yields more than any other plant in the tent), and has responded well to multiple different grow lights. The smooth-smoking buds promote relaxation and good vibes. The perfect daytime strain (not too heavy) and well-loved by those looking for more classic mental effects. The potency has been described as reminiscent of California weed from the 1990s and early 2000s – $35 for 3 seeds
- I hope that list helps you get started!
This Zkittlez Auto plant was harvested 85 days from germination
Glossary of Most Important Terms When Shopping for Seeds or Clones
- Auto-flowering Strains – Auto-flowering plants grow buds automatically and are usually ready to harvest in under 90 days from germination. Can be a good choice for a first grow, but auto-flowering seeds are only available from specialized breeders.
- Photoperiod Strains – Most cannabis seeds are photoperiod. If you find seeds, they are likely photoperiod seeds. Photoperiod plants need daily 12-hour dark periods to grow buds (usually done by putting grow lights on a timer). Photoperiod plants typically take between 3-5 months to grow from seed to harvest. Read more on how long it takes to grow weed. Don’t worry if you’ve got photoperiod seeds. This tutorial recommends auto-flowering strains, but I’ve also included instructions for photoperiod plants in the step-by-step directions.
- Feminized seeds – All resulting plants are female, which means they grow buds. I highly recommend starting with feminized seeds for your first grow so every plant produces buds for you.
- Regular seeds (non-feminized) – Half the plants will be male, which grow pollen sacs instead of buds. Male plants are non-potent and make nearby buds seedy. If growing with regular seeds, you should identify and remove male plants as soon as possible.
- Clones are basically small plants and don’t need any special treatment. A clone is usually known to be male or female (ask to be sure it’s female if you want to grow buds!). You can also take clones of your plants and use them as free plants in future grows.
- Bag seeds (seeds you randomly find in buds) can be hit or miss. Some growers get lucky with bagseed, but unknown genetics can be a confidence killer if buds turn out poorly even though you did everything right. Start with trustworthy genetics to help ensure plants are predictable and produce the results you want. Learn more about starting with “found” seeds.
Now that you’ve got everything, it’s time to start growing!
Here’s an HPS-grown bud from a THC Bomb Auto plant. This strain always makes beautiful buds but for some reason they got especially glittery under the small HPS. One of my favorite smokes from that grow!
Quick Step-By-Step Grow Guide
The hardest part of growing is choosing a good setup. Once you create a nice growing environment, nature will do a lot of the work for you.
1.) Set up your grow space
- Get the items listed above
- Set up your grow tent if using one
- Hang your grow light. Both the HLG 100 and 150W HPS recommended for this tutorial should be kept about 12″ away from the tops of plants.
- Fill your plant pots with potting mix
- Assemble your area and turn the grow light on for 24 hours before germinating seeds (make sure everything works before you actually start your grow)
- Temperature should stay be between 70-85F (20-30C) day and night. If it feels comfortable to you, it’s probably comfortable for your plants.
Whether you’re using a grow tent or a closet, the main idea is to first hang your grow light
Then get your plant pots ready (or set up your hydroponic reservoir). If you plan on setting up an exhaust to remove heat and/or get rid of smells, now is the time. A venting system can be as simple as adding a fan pointing out.
If you want to ensure you never smell your plants when the tent is closed, you’ll also have to connect the exhaust fan to a carbon filter with ducting.
Don’t forget to turn everything on for at least 24 hours before you start germinating! You want to know what to expect from the environment before you have live plants on your hands.
2.) Germinate Your Seeds
I like this germination method, but there are many ways to germinate seeds (including planting them directly in the soil). If starting with rooted clones, you can skip directly to the next step.
It’s always a good idea to germinate at least one extra seed in case you happen to have a dud. I recommend growing 1-2 plants for your first grow to keep things small and simple, so start by germinating 2-3 seeds.
There are tons of ways to germinate seeds and they all work. The most important thing with any germination method is to make sure seeds stay moist and warm.
3.) Vegetative Stage – Plants Grow Only Stems and Leaves
At first, your cannabis plants will only grow new stems and leaves (no buds yet).
Your main tasks in this stage are:
- Water your plants regularly (or tend to the hydroponic reservoir)
- Give nutrients at half the listed strength (if using nutrients)
- Watch for plant problems and react quickly if you see anything odd
- (Optional) Get familiar with plant training to increase yields
Your plants will only grow stems and leaves at first. In the vegetative stage, plants keep getting bigger but don’t grow any buds
Most cannabis plants naturally grow in a “Christmas tree” shape in the vegetative stage unless you take action to change it
For example, these autoflowering plants are bushy and short because I trained them to grow in that shape (starting when they were just 3 weeks old). This bushy shape forces cannabis plants to grow many bud sites as opposed to just one main bud site at the top of the “Christmas tree”.
There’s nothing wrong with letting plants grow naturally, especially for your first few grows. But if you plan to keep growing inside under grow lights, plant training is important to achieving the best yields.
4.) Flowering Stage – Buds Start Growing!
This is the stage where plants start growing buds. It’s exciting! You’re getting closer to harvest every day.
If you started with auto-flowering seeds…
- Auto-flowering plants will automatically start growing buds around 3-4 weeks from germination
- Besides switching to using flowering nutrients, plant care doesn’t really change from the vegetative stage.
- Buds are typically ready to harvest 2-3 months after germination
Auto-flowering plants start making buds when they’re 3-4 weeks old from germination. You don’t need to do anything special. This autoflowering plant is 4.5 weeks old.
If you started with photoperiod seeds…
- Photoperiod plants require you to put grow lights on a timer and give them 12-hour dark periods every day in order to grow buds. The term “photoperiod” actually refers to the fact they respond to light periods (“photo” can mean light + “period”). Photoperiod plants won’t make buds until you initiate the flowering stage with a 12/12 light schedule.
- Since you “tell” the plant when to start flowering, the vegetative stage can be as long as you want.
- While auto-flowering plants naturally tend to stay relatively short, photoperiod plants can easily get huge and out of control if you wait too long to initiate the flowering stage. On average, plants about double in size after the switch to 12/12, so you should initiate the flowering stage when plants are about half the final desired size.
- Be careful to not let any light get to the grow space during the “night” period or plants may revert to the vegetative stage (which takes time to fix) or herm (causing seedy buds).
- Photoperiod plants typically have an 8-14 week flowering stage (length of the flowering stage depends on strain)
- Example photoperiod timeline: 6-week vegetative stage + 8-14 week flowering stage gives a total grow period of 3-5 months from seed to harvest.
Photoperiod plants typically take 1-3 weeks after switching to 12/12 before they start making buds. At first, the buds look like bunches of leaves in a star shape, then white hairs start growing from the middle
After plants start flowering, double-check to make sure all your plants are only growing white hairs at the joints. This ensures your plants are female and forming buds.
If you see what looks like little bunches of spade-shaped balls with no hairs, that means the plant is male and should be removed from the grow room so it doesn’t pollinate your female plants.
If you see pollen sacs (look like bunches of pointy grapes), remove the plant immediately from the grow area. Why?
Nutrients – Switch to flowering nutrients
- Once you see buds forming, it’s time to start using the Dyna-Gro “Bloom” bottle for nutrients (or whatever Bloom nutrients you’re using)
- Start at half strength compared to the suggested dosage. Supplementing your plant with extra nutrients can help produce the biggest and most potent buds possible, but it’s easy to overdo it.
- Note: Suitable flowering nutrients are low in Nitrogen, and rich in Phosphorus/Potassium.
- Learn more about cannabis nutrients
An example of untrained autoflowering plants (notice how they have a “Christmas tree” shape)
These autoflowering plants were trained to grow short and bushy
5.) Harvest Time
If you have followed the instructions so far, you’re now approaching harvest! I’ve created a complete guide to harvesting your weed but here’s a quick summary of when to harvest:
- Wait until the buds on your plants stop growing new white “hairs” (pistils). At this point, you probably still have a few weeks left.
- When 90% of the pistils have darkened and started curling in, your buds should be fat and ready for harvest.
- You can get even more accurate results by looking at the glittery “trichomes” on the buds under a magnifier, as these turn cloudy white when the buds have reached their highest potency.
This bud is ready to harvest. All the white hairs have darkened and curled in. If you click the picture and zoom in, you can see that nearly all the sparkly trichomes are milky white, indicating that this bud has reached the highest level of THC.
Another bud that’s ready to harvest. Notice how most of the hairs have darkened and curled in
Different strains may have a different bud appearance at harvest, but the general idea is the same (hairs darken and curl in, buds are fat)
At that point, buds only need to be dried and cured before they are ready to be enjoyed.
Example yield from 150W HPS – 2 Autoflowering Plants – 3.5 oz
Each plant produced just under 2 ounces and height was about 1 foot (30 cm) at harvest. Left plant was Critical Jack Auto by Dinafem (unique smell and thoroughly enjoyable effects) and the right was Sour Diesel Auto by Humboldt Seed Organization (classic sativa effect in auto-flowering form). I grew these in my bedroom (didn’t have an available closet) so I kept them in a 2x4x5 grow tent to contain the heat/light. Other than the tent, there weren’t really any upgrades compared to the base supplies list. I didn’t use an exhaust fan and it stayed about 80F (27C) in the tent.
This is a good harvest but does show what’s possible for growers who follow all the steps in this article including the optional plant training to create multiple main buds instead of just one.
This is the final yield of the 2 plants pictured above (about 3.5 oz)
Closeup of the Critical Jack buds
Example yield from HLG 100 LED Grow Light – 4 Autoflowering Plants – 5.5 oz
Here’s an example harvest from the HLG 100 Quantum Board Grow Light (the premium $150 alternative to the HPS). Instead of Dyna-Gro nutrients, this grow used the General Hydroponics Flora trio + Calimagic as nutrients. Grow medium was Mother Earth Coco + Perlite mix (my favorite pre-made coco mix).
The total yield under the HLG 100 was 156.12 grams or about 5.5 ounces.
These 4 autoflowering plants were kept in a 2x2x3 grow tent with a carbon filter/exhaust fan (lower right) to remove smells. I later upgraded the fan to an Infinity Cloudline so it would run silent (this was also kept in my bedroom so I want zero light and sound when I’m sleeping). These plants could have been grown in a closet or spare room as long as the smell didn’t bother you.
Main upgrades: A grow tent, carbon filter, and exhaust fan to contain light and smell.
I first harvested the Auto Amnesia (absolutely love this strain every time I grow it)
Closeup of the Auto Amnesia buds. Pretty thick for growing under a 100W light with 3 other plants!
A bud from the Auto Amnesia after being dried and cured
Next was the Gorilla Glue Auto plant. I’ve never been happy with this strain and I wouldn’t recommend it. Bud effects and smell are good, but plants grow weird and buds are ugly and airy. Two other examples of Gorilla Glue Auto plants I grew for comparison.
The THC Bomb Auto plant made fat sticky buds, as usual
This is the Ultimate Auto plant. This strain also yields well no matter how you grow it
Those last 2 plants at harvest (THC Bomb Auto and Ultimate Auto)
You got this! Even if you follow just 80% of the directions in this tutorial, if you can keep your plant alive you should easily be able to yield at least 1 ounce!
6.) Prepare for next grow
You’ve already got some of your growing supplies, so your second grow will be cheaper than the first one.
Possible ongoing costs:
$5/grow to replace HPS bulb – The 150W HPS bulb needs to be replaced every 3-4 grows as they begin to lose brightness over time (not applicable if using an LED grow light) – $15 for a new bulb every 3 grows, or
Future grows: As little as $48/harvest (for electricity, nutrients, mixing your own coco/perlite mix, and a new HPS bulb every few grows) – only $34/harvest if using the suggested LED grow light (it uses less electricity and you don’t have to replace any bulbs).
What about buying seeds?
If you’re buying new seeds every grow, it becomes an ongoing cost. Buying seeds can get expensive! If you stick to auto-flowering strains, you’ll probably have to buy seeds every new grow. However, after your first grow, you’ll have experience under your belt and be prepared to grow photoperiod strains. Initiating the flowering stage can be a little trickier but overall care is basically the same. Photoperiod plants give you the ability to take clones, which is the easiest source of basically free plants. Another way to get basically free plants is to breed your own seeds or even make your own feminized seeds at home.
As time goes on, your costs go down while your yields go up
Other differences after first grow
- Better yields and bud quality – It’s common for growers to get higher yields and better buds on their 2nd and 3rd grows, even if the setup stays exactly the same. That’s because a little time and experience help you dial in your personal grow style. It’s also common for indoor growers to learn about plant training, which is a free technique to dramatically increase yields under grow lights.
- More confidence – If you decide to upgrade your grow (get a grow tent, bigger light, better strains, etc.) you’ll actually have the experience to know what’s needed to accomplish your goals.
IMPORTANT: Always keep learning!
After a few grows, many growers become convinced there’s nothing left to learn about growing. Believe me, there is always more to learn. I learn something new almost every day. A lot of “common” grow knowledge that’s been passed down for generations is being proven wrong. People are learning about better cultivation practices, developing new strains, and creating new techniques to get better yields and bud quality. Never mind all the new growing equipment aimed at home growers. Keep your mind open and remember to question everything. That’s the only way to ensure each harvest is better than the last!
How to Start Growing World-Class Weed for $135 You want to try growing weed but refuse to spend a fortune. You don’t need the biggest harvest ever, but your time or effort must be rewarded with a